Brembo’s 6-Piston Monoblac Calipers for Mitsubishi Lancer Evo X

Thursday, 21 July 2011 10:02 by Admin

Mitsubishi Lancer Evo X; Front Kit (6-Piston Brembo Monobloc Caliper - Black)
Part #: 1N0.8003A

Caliper Only upgrade using the stock rotor
6-Piston Brembo Monobloc Calipers: Black, Red, Silver or Yellow
High Performance Ferodo FM1000 Street/Track Pads
Goodridge Braided Stainless Steel Lines
Mounting Adapter Brackets / Hardware

Coming soon: Red, Silver or Yellow calipers! Call your sales rep for details!

Available from Motovicity Distribution
www.motovicity.com
888-SPEED-16

Mishimoto: LS-Swapped 1993-95 Mazda RX-7 Aluminum Fan Shroud

Wednesday, 20 July 2011 14:06 by Admin

93-95 Mazda RX7 with LS Engine Swap Fan Shroud Kit
Part #: MMFS-RX-LS

Mishimoto has just released an aluminum fan shroud designed to work with the Mishimoto LS-Swapped RX-7 aluminum radiator. A Mishimoto Aluminum Fan Shroud will secure the fans in place while increasing and channeling the airflow through the radiator for improved engine cooling functions. Maintaining an engine that runs efficiently and cool will extend the life of the engine and help improve its performance. No modifications will be required when installing the Mishimoto Aluminum Fan Shroud on a 1993-1995 RX-7 with the Mishimoto RX-7 LS Swap radiator.

Available from Motovicity Distribution
www.motovicity.com
888-SPEED-16

DEI's Amazing CryO2 Graphic!

Tuesday, 19 July 2011 12:13 by Admin

Download your DEI CryO2 graphic image HERE!

Motovicity Distribution
www.motovicity.com
888-SPEED-16

AEM: Universal High Flow -10 AN Inline Fuel Filter

Tuesday, 19 July 2011 09:49 by Admin

Universal High Volume Fuel Filter. Inlet: -10AN Outlet: -10AN
Part #: 25-201BK

The AEM High Flow -10 AN Inline Fuel Filter is CNC machined from 6061-T6 Aluminum and Hard Anodized Black. AEM’s engineers designed this filter with the racer in mind and with the intention of maximizing flow, filtration and ease of installation. The end caps are machined with -10 AN female fittings with o-ring receiver groove that allow the filter to flow up to an astonishing 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI. All sealing o-rings and gaskets are made of Viton for outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels. The commonly available replacement filter cartridges filter as low as 7 microns. The standard 2” OD allows for easy mounting virtually anywhere in the vehicle.

Available from Motovicity Distribution
www.motovicity.com
888-SPEED-16

Cool Off This Summer With DEI's CryO2!

Monday, 18 July 2011 08:34 by Admin

EXTRA 5% off ALL In-Stock CryO2 Parts! (July 18th to August 19th)

CryO2 is like having winter’s cold intake temps during the heat of the summer!

The CryO2 system looks a lot like a Nitrous Kit, but looks can be deceiving. The CryO2 system is really nothing like a nitrous oxide system. It’s more like a super cooler for your intake air, your intercooler or your fuel system. Or all of them, if you want the maximum cooling effect. The system is easy to install, and is not dangerous at all to your engine because no gasses are actually sent into your engine when installed properly. All of the carbon dioxide is used for cooling the individual components, and then safely directed away from the intake.

CryO2 technology can be fitted to stock, normally-aspirated engines; forced air induction engines; turbocharged engines, diesels and vehicles equipped with nitrous oxide (NO2).

Other accessories are available including an Intercooler Water Sprayer Kit to enhance intercooler performance, an adjustable timer switch to control the on and off flow of CO2, Purge valves and a new for 2010 the CryO2 Fuel Chiller System. This offers the ultimate method for removing heat from fuel by charging a series of tubes surrounding the flow of fuel with CO2 to super-cool the fuel.

Click HERE for more information.

Available from Motovicity Distribution
www.motovicity.com
888-SPEED-16